Hydro Jetting in Brampton

When a cable is not enough

We usually start with a drum machine. If the cutter head comes back coated in grey grease, or the same kitchen line plugs again within a month, the pipe walls are lined with fat that the cable simply slices through. Jetting is the next step. A hose with a rear-facing nozzle pulls itself up the drain while jets of water peel the coating off and flush it downstream to the city sewer.

How a jetting visit runs

1. Camera first where it matters. On a main sewer or any line older than about forty years, we look inside before we pressurise it. Cracked clay or a separated joint gets a different plan.
2. Pick the nozzle. A penetrating nozzle opens a full plug; a spinning or flat-spray head scours walls; a root-cutting head handles fine root mats.
3. Work from the cleanout. In most Brampton basements that is the 4 inch cleanout near the front wall, or a floor drain trap we pull for access.
4. Pull back slowly. The real cleaning happens on the retreat, metre by metre, until the water returns clear.
5. Prove it. We run the fixtures at full flow and, on sewer jobs, send the camera back through.

Lines we jet most often

• Kitchen branch lines in semis and townhouses where two families share a long horizontal run.
• Main building drains in Bramalea and Peel Village houses that still have clay or cast iron to the property line.
• Basement grates that overflow in downpours because silt has settled in the trap and the line beyond.

What it leaves behind

Jetting does not coat or line the pipe; it returns it to bare wall. Grease will build up again if it keeps going down the sink, so we talk through scraping pans into the green bin and running hot water after the dishwasher. Root intrusion through clay joints also returns, typically within one to three growing seasons, which is why we record the footage and the distance to each joint for your file.

Ready when you are. One call, a real plumber, an arrival window.